• Home
  • Mcc Bullbar Rocker Front With Welded Triple Loops Fits Nissan Pathfinder R51 (smooth Bumper) (06/2010-09/2013) (with Fog)
  • Mcc Bullbar Rocker Front With Welded Triple Loops Fits Nissan Pathfinder R51 (smooth Bumper) (06/2010-09/2013) (with Fog)
  • Mcc Bullbar Rocker Front With Welded Triple Loops Fits Nissan Pathfinder R51 (smooth Bumper) (06/2010-09/2013) (with Fog)

Mcc Bullbar Rocker Front With Welded Triple Loops Fits Nissan Pathfinder R51 (smooth Bumper) (06/2010-09/2013) (with Fog)

MPN : 03007-7802-R51-SB
$2,690.00

SHARE :

MCC BULLBAR ROCKER FRONT WITH WELDED TRIPLE LOOPS FITS NISSAN PATHFINDER R51 (SMOOTH BUMPER) (06/2010-09/2013)

 

ROCKER BAR SEIRES, THIS UNIQUE LOOKING BULLBAR AVAILABLE WITH NO LOOP, TRIPLE LOOP, SINGLE BLACK OR STAINLESS LOOP.

078-02 ROCKER BULLBAR

 

  • A : ADR & WINCH COMPATIBLE AND RATED FOR A 12,000lb LOW MOUNT WINCH.
  • B : FOR TYPE 078-01 NO LOOP: LOOP DOES NOT EXISTS
    FOR TYPE 078-01 STAINLESS STEEL SINGLE LOOP: BOLT ON SYSTEM FOR CENTRE LOOP MADE BY 1.5MM 304 STAINLESS STEEL 76.2MM DIAMETRE WITH STANDARD TWO AERIAL MOUNTING PORTS ON BAR.
    FOR TYPE 078-01 BLACK STEEL SINGLE LOOP: BOLT ON SYSTEM FOR CENTRE LOOP MADE BY 1.5MM STEEL WITH 76.2MM DIAMETRE WITH STANDARD TWO AERIAL MOUNTING PORTS ON BAR.
    FOR TYPE 078-02 TRIPLE LOOP: FULLY WELDED 3 PIECES 1.5MM THICK STEEL WITH 60MM DIAMETER CENTRE TUBE, 52MM SHOULDER TUBES WITH STANDARD TWO AERIAL MOUNTS TAB.
  • C : BAR CONSTRUCTED OF ONE PIECE 3MM THICK STEEL WITH DURABLE SAND BLACK POWDER COAT FINISHED STANDARD
  • D : INTREGRATED WINCH MOUNT ON CHASSIS.
  • E : 4.5MM THICK INTERNAL BAR MOUNTING FLANGES WITH 3.5MM WING BRACING PLATES.
  • F : FULLY WELDED 15MM THICK TOWING SHACKLE MOUNTS STANDARD, INTERGRATED DIRECTLY INTO THE INTERNAL STRUCTURE FOR MAXIMUM STRENGTH. (SHACKLES MAY BE PURCHASED SEPARATELY).
  • G : DESIGNED TO MAXIMIZE APPROACH AND DEPARTURE ANGLES. WITH HIGH CLEARANCE SIDE WINGS AND FRONTAL PAN.
  • H : RE-INFORCE HI-LIFT JACK LIFTING POINTS FOR EASY RECOVERY OPERATIONS.
  • I : TWO PRE DRILLED LIGHT MOUNTING POINTS ON TOP OF BULLBAR CAN FIT UP TO 28 INCH L.E.D. LIGHT BAR OR 7 INCH L.E.D. ROUND LIGHTS UNDER THE CENTRE LOOP.
  • J : STANDARD RECESSED LIGHT PORTS WITH 110MM DIAMETER HALOGEN FOG LIGHTS (HB4).
  • K : 81MM DIAMETER L.E.D PARK & INDICATORS LIGHTS

 

MCC NISSAN PATHFINDER R51 (SMOOTH BUMPER) ROCKER FRONT BULLBAR

 

  • High quality made bar 
  • Airbag and winch compatible bracket
  • ADR Approved and destruction tested
  • LED Park and indicator light
  • Single upright design
  • Powder Coated
  • Strong welds
  • Made in MCC factory
  • Dual aerial mounts
  • Dual hi-lift jacking points
  • Driving lights mounts
  • High quality steel components
  • Over rider protection
  • Front protection bumbers
  • Full bumper replacement

 

***** COMES WITH FOG LIGHTS *****

 

***** UNDER PROTECTION ALSO AVAILABLE *****

 

http://www.pxwholesales.com.au/index.php?route=product/product &product_id=19348

 

Freight
 

Please call the store for freight prices we will take your postcode and accurately quote.

Pick up available in Dandenong, we have the full MCC bar range on display in our showroom!

Please call before you purchase so we can guarantee stock. If out of stock order time is 4-8 weeks

 

Fitting
 

We have a fully qualified fitting and service center with qualified mechanics and Auto electricians, Please contact the store for a fitting quote.

 

 

NOTE: These is a genuine MCC quality product - Don't settle for inferior products on the market

 

* If you have any queries about any of our products please contact us.

 

1 Year Manufacturer Warranty!

 

Go ahead, grab yourself a bargain!

 

 

DESIGNED AND TESTED IN AUSTRALIA TO MEET ADR69 STANDARD.

MCC SPECIFICATIONS
CAR MANUFACTURER NISSAN
MODEL PATHFINDER R51 (SMOOTH BUMPER)
SUIT ST, ST-L, Ti, Ti 550
TYPE ROCKER FRONT BULLBAR WITH WELDED TRIPLE LOOPS
TYPE NUMBER 078-02
YEAR 06/2010-09/2013
0 reviews   0 reviews    

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



We know waiting is time consuming. We use Australia post to deliver to anywhere in australia including PO BOX.

All items are shipped from our warehouse and pickups can also be organised from showroom.  We ship your item/s within 1 business day after receipt of payment. Your item/s will be very well wrapped in bubble wrap and placed in a padded bubble bag or packing box.

 

  • Uniquely barcoded on every parcel/order
  • We despatch orders within 24 hours ater the payment has cleared.
  • Trackable online via your order

 

We accept payment via Direct Bank Deposit (preferred) and PayPal only.

If you are paying via direct bank deposit, please use your eBay user id as bank reference so we can link your payment to your purchase. 

Our company bank account details are as follows:




PX Wholesales Pty Ltd
BSB: 06 3125  Account number: 1113 4396


 

We stand behind everything we sell. If you are not satisfied with your purchase, you can return it for a replacement or refund.  Items must be returned within a reasonable time of purchase. Guarantee doesn’t cover ordinary wear and tear or damage caused by improper use or accidents.

If your item has a manufacturing defect in its materials or workmanship, you can return it at any time.

Simpling call or email us with a description of the issue,we will return you back on the same business day. Refund only applies for the cost of the item (excluding all P&H charges). Warranty will be void if products are misused, mishandled or modified in any way. We do not offer refunds for customers who change their mind after purchasing an item.

SHOWROOM
15 FRANKSTON-DANDENONG ROAD, DANDENONG 3175

OPEN HOURS MON - SAT
9am - 5pm

Contact Us
+613 9769 1967
sales@pxwholesales.com.au